Aem-V3-Hd-Water-Methanol-Injection-Kit-5-Gal-Tank-For-Diesel-gas-P-n-30-3301-01-hcr

Aem V3 Hd Water Methanol Injection Kit 5 Gal Tank For Diesel/gas P/n 30-3301

Aem V3 Hd Water Methanol Injection Kit 5 Gal Tank For Diesel/gas P/n 30-3301

Aem V3 Hd Water Methanol Injection Kit 5 Gal Tank For Diesel/gas P/n 30-3301
Water-Methanol Injection Kit with 5 gallon tank. The AEM Water / Methanol Injection Kit is universal by design and adapts to virtually any forced induction gas or diesel engine via multiple jets to suit your vehicles power requirements. WHY YOU WANT ONE AEMs Water / Methanol Injection Kit reduces air inlet temperatures and exhaust-gas temperatures, which allows you to increase boost pressure and advance timing on forced induction gas applications to create more power by utilizing the cooling effects of the system under heavy lead. Its like getting to run 100+ octane gas for the price of Premium! WHY YOU WANT THE AEM KIT AEMs Water / Methanol Injection Kit includes all the parts and features necessary to do water/methanol injection right. No hidden costs or optional components are required. Unlike other popular kits on the market, there are two tank options; a one- or five-gallon tank with a fluid level sensor standard. The compact, one-gallon reservoir is intended for racecar applications where every pound of weight saved is critical. It is also ideal for those who drive mildly and run at wide-open-throttle sparingly and want to retain as much trunk space as possible while gaining the benefits of a water / methanol injection system. The five gallon reservoir is included in the BRUTE FORCE HD Water/Methanol Injection kit; allowing for extended range. The AEM kit also makes engine protection a requirement, not an option. Included is a Boost Safe output in every controller AEM offers. Critical safety features are integrated into the system to virtually eliminate any chance of failure, including an integral fluid level sensor in the reservoir, a dash light to warn of low fluid level or error codes (including short circuits, battery voltage and more), and an additional output to either decrease ignition timing or boost if the system detects low fluid levels or a system error. This allows you to retard timing or reduce boost via a ground output if the system runs out of fluid or detects an error. With the AEM Water / Methanol Injection Kit, you get all the best features in one low priced kit. HOW IT WORKS Once installed, the Water / Methanol Injection Kit uses a boost-dependent, variable-flow progressive controller to determine the amount of water / methanol mixture (up to 50%) to feed into the inlet stream from the included one- or five-gallon reservoir. The controller commands a progressive 150-PSI pump that delivers the mixture, and flow adjustments at the inlet are made via two different-sized jets (included) that are designed to match most engine power requirements. The result is significant horsepower gains using pump gasat about half the cost of Racing Fuel. TERMINOLOGY EXPLAINED By now youve most likely heard various terms in reference to water/methanol injection systems. Some refer to these systems as just water injection, methanol injection, and/or meth injection for short. In addition to those terms, these systems are often referred to as alcohol injection or water/alcohol injection. The bottom line is all of these terms are used to reference the same type of system. What some may or may not know is that methanol is known as methyl-alcohol. Methanols scientific name is where the alcohol variant name has come from. Essentially, alcohol and methanol is the same thing, however there are different types of alcohol. Legal in California only for racing vehicles which may never be used upon a highway. Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash. Resistance and mounting tabs. Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid. Boost Safe failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device). Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost. Precision-machined billet-aluminum injector with integral check valve. Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min). 1.15-gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector (tank-less systems available). 20 feet of injection tubing included. LED dash light for system status and low fluid warning. Please feel free to check out my. The free listing tool. The item “AEM V3 HD WATER METHANOL INJECTION KIT 5 GAL TANK FOR DIESEL/GAS P/N 30-3301″ is in sale since Thursday, January 28, 2010. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts”. The seller is “boombop” and is located in Rancho Cucamonga, California. This item can be shipped worldwide.
  • OE/OEM Part Number: None
  • Type: Water/Methanol Injection Kit
  • Universal Fitment: Yes
  • Brand: AEM
  • Manufacturer Warranty: 1 Year
  • Items Included: Mounting Hardware
  • Performance Part: Yes
  • Features: Universal kit includes everything you need for ins
  • Manufacturer Part Number: 30-3301

Aem V3 Hd Water Methanol Injection Kit 5 Gal Tank For Diesel/gas P/n 30-3301

Incoming search terms:

  • is water meth injection kit legal in california