1971-72-Chevelle-FITech-Go-EFI-4-Fuel-Injection-Conversion-Kit-FI-Gas-Tank-30001-01-ffq

1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001

1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001

1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001
The Go EFI 4 Self-Tuning Fuel Injection is rated at 600 HP but is suitable for engines from 250 HP thru 600 HP. This system is perfect for your everyday driver right up to your weekend street machine or bracket racer. It features the FASTEST most accurate self-learning available, timing control, wet flow annular discharge and tons of additional features. It fits any 4-bbl intake manifold and is the most self-contained and full-featured unit of this type. The ECU (computer) is mounted on the throttle body, which greatly simplifies installation. No hole in your firewall and no unsightly harness draped across your engine. This is also the only computer mounted throttle body that offers spark control without the need for an external spark box or special distributor. It also has a built-in fuel pressure regulator. A handheld controller features a touch screen for quick and easy initial set-up. Note that this EFI system can also be used with an engine compartment mounted Fuel Command Center, which provides a returnless system. See our other listings. A List of features/benefits of the Go EFI 4 600 HP System. (4) Hi-Flow 600 HP injectors. Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes. Self-tuning After startup the ECU immediately takes over and provides your vehicle with an optimum tune! Basic install can be done with just 4 wires and 2 sensors to install. Uses a Bosch 4.2 wide band O2 sensor, while all other sensors are easily replaceable GM style parts. The ECU is mounted on the throttle body so there are NO external boxes or harnesses to clutter up your engine compartment or under dash. This saves you a huge amount of time and keeps things simple and neat. Throttle bodies have a completely universal base to fit any 4-bbl manifold. Throttle linkage suits most transmissions. Choice of three fuel inlet connections. All Go-EFIs feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing! Go-EFI Systems feature wet flow technology and have a unique Swirl Spray Annular discharge design that assures COMPLETE ATOMIZATION! Ignition timing can be controlled and adjusted on the fly from your touch screen controller. Air Fuel ratios can be optimized on the fly as you drive! Try that with your carb. Features 1 adjustable fan control switch. Will work with CDI box but not required to control timing. Built in fuel pressure regulator. No extra regulator to mount on your firewall. Use of ignition timing control is optional and not required. Ignition timing control does not learn and requires synchronizing distributor to engine with a timing light. Includes 2 piece neck design that simply connects with supplied 2 ID rubber hose. EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation. Perfect for your Pro-Touring, Autocross or Road Racing ride. Fuel pump and sender are recessed in the tank for easy installation with no modification needed to your car. Looks like an OE tank when installed. Silver powder coat finish. 39-1/4″ x 24-1/2″ x 7-3/4. Sending unit and fuel pump are not included. Free Install Kit Includes. Air cleaner Stud and wingnut adapters. Carburetor/throttle body mounting stud kit. (Part# MS67172OGT-FI, FI30001, CPCI-K). Orders placed Friday and through the weekend will be processed Monday (excluding Holidays). The item “1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001″ is in sale since Thursday, December 27, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Tanks”. The seller is “classic_performance_cpp” and is located in Placentia, California. This item can be shipped to United States.
  • California Prop 65 Warning: Cancer and Reproductive Harm
  • Manufacturer Part Number: MS7172OGT-FI, FI30001, CPCI-K
  • Brand: Tanks Inc

1971-72 Chevelle FITech Go EFI 4 Fuel Injection Conversion Kit FI Gas Tank 30001