Increased Coolant Flow, Decreased Coolant Temperatures. The rear cylinders on the 5.9/6.7L Cummins suffer from a lack of coolant flow, and therefore, experience the highest coolant temperatures. This can cause excessive pressure to build in the cooling system, especially the rear of the block and blow out freeze plugs externally, or the smaller diameter plugs under the valve cover, leading
» Read moreBANKS POWER Monster-Ram Intake Sys w/Fuel. Line and 4″ to 3.5″ Hump Hose- 2007-18 Dodge/. RAM 6.7L, 4.0, Red. CUMMINS 6.7L ISB 1ST/2ND GEN. FOR RACE USE ONLY. Does not have provisions for emissions equipment. For street-driven vehicles, choose Monster-Ram Gen 2. Flows 1008 cfm, a 133% increase over stock. 4-inch (red powder-coated) with Fuel Line. 4-inch CNC machined inlet.
» Read moreBANKS POWER Monster-Ram Intake Sys w/Fuel Line. And 4″ to 3.5″ Hump Hose – 2007-18 Dodge/. RAM 6.7L, 4.0, Natural. CUMMINS 6.7L ISB 1ST/2ND GEN. FOR RACE USE ONLY. Does not have provisions for emissions equipment. For street-driven vehicles, choose Monster-Ram Gen 2. Flows 1008 cfm, a 133% increase over stock. 4-inch (natural) with Fuel Line. 4-inch CNC machined inlet.
» Read moreExhaust Manifolds & Up-Pipes. The BD-Power 1036620 High-Idle Kit for your 98.5-04 Dodge 5.9L Cummins works great with remote starters, PTO’s and extended idling applications. Warm up your engine faster on cold mornings with BD Diesel’s High Idle Kit. Quick and easy install, the High Idle switch mounts on the dashboard and plugs in under the dash. The rotating switch
» Read moreBANKS POWER Monster-Ram Intake System w/Fuel. CUMMINS 6.7L ISB 1ST/2ND GEN. FOR RACE USE ONLY. Does not have provisions for emissions equipment. For street-driven vehicles, choose Monster-Ram Gen 2. Flows 906 cfm, a 109% increase over stock. 3.5-inch (red powder-coated) with Fuel Line. 3.5-inch CNC machined inlet. Four 1/8-inch NPT ports designed for optimal atomization of water-methanol or NOS. Accommodates
» Read moreBanks 3.5 Monster Ram Intake Elbow Kit fits 07.5-18 Dodge 6.7L Cummins Diesel. Monster-Ram improves airflow from the intercooler. Flows 906 cfm (69.22 lbs/min) compared to Stock’s measly 432 cfm (33.00 lbs/min). Raises boost without increasing backpressure at the turbine. Result: a more responsive, power efficient engine. Up to four 1/8 inch NPT ports for flexibility! The top two NPT
» Read moreFitment and Product Information. Brandname: BD Diesel Performance Part Number: 1036620 Product Details. For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling, these are the times, when you need an elevated idle. BD’s High Idle kits are easy to install and in
» Read moreNCB Diesel & Offroad. Improves airflow from the intercooler. 3.5-inch (red powder-coated). Monster-Ram raises boost without increasing backpressure at the turbine by Improving airflow from the intercooler. Result: a more responsive, fuel-efficient engine. Has six 1/8-inch NPT ports! For use with stock intercooler pipe. The Banks Monster Ram is the highest performing Cummins Intake Elbow on the market, outflowing all
» Read moreAirDog II 4G 100 GPH Fuel Lift Pump & Sump For 05-18 5.9L & 6.7L Cummins Diesel. This is the AirDog II-4G DF-100 fuel system for the 2005 and UP Common Rail Cummins. This system mounts to the frame rail using the supplied sandwich plate mounting system. A Fuel Module Upgrade Kit is installed in the factory fuel basket to
» Read moreAirDog II 4G 100 GPH Fuel Lift Pump & Dual Sump For 89-93 Dodge Ram 5.9L Cummins. This system mounts to the frame rail using the supplied sandwich plate mounting system. The suction side hooks up to the factory suction fitting in the fuel module. The pressure side connects directly into the side of the injection pump, bypassing the factory
» Read more
