6AN Fuel Line Kit with LS Swap Fuel Filter Regulator 58PSI 6AN CPE Hose Braided
[Compatibility] Nylon and stainless steel braided fuel hose kit can be compatible with gasoline, diesel, and other fuels (Except for E85 and ethanol). Maximum working pressure: 750psi. Temperature range: -22°F to 248°F. [Fuel Filter Regulator] This fuel filter features an internal bypass that regulates fuel output pressure to 58psi. The LS Swap fuel pressure regulator has a built – in 10 micron fuel filter element to ensure that clean fuel is delivered to your engine, thus protecting the engine and increasing engine life. [Material] 6AN fuel hose is made of cpe rubber inner, with a layer of 304 steel wire and nylon outer braid; the hose fittings are made of aluminum alloy. [Package includes] 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp, 1pcs 6AN to 3/8″ fitting, 1pcs 6AN to 5/16″ fitting, 1pcs 6AN to 3/8 90 Degree Fitting, 1pcs fuel pressure regulator (58psi), 1pcs wrench and 6AN braided fuel line (Length: 25 Feet). Hose ID: 0.31. Hose OD: 0.56inch. The video showcases the product in use. The video guides you through product setup. The video compares multiple products. The video shows the product being unpacked. Conforms to USCG Type A1-15 SAE J1527. Widely used for supplying fuel to motors in boats or marine. Transmission Oil Cooler Hose. Conforms to SAE J1532. Provides a safe, heat and oil resistant connecting between oil cooler and transmission or engine. NBR Rubber Fuel Hose Line. Conforms to SAE 30R7. Widely used as a fuel line, emission control line, fuel return line, etc. Conforms to SAE 30R9. Wildly used in fuel line, return line, fuel pump, EFI, LS swap, etc. Swivel Hose End Fitting. The swivel fitting is working with nylon braided and stainless steelfuel hose.