1969-72 Chevy Blazer Fuel Injection EFI Aluminum Gas Tank Kit Side Fill 90ohm
Steering. Brakes. Suspension. This tank is designed to bolt up to the bottom side of the frame rails but it can be mounted in different configurations including on top or even in-between the rails in some cases. It is up to the installer to drill and locate the mounting holes. Mounting hardware not included. 1969-72 Chevy Blazer and GMC Jimmy Frame Mount Fuel Tank. 1-1/2 Side Fill Filler Neck. Die Stamped Galvanized Steel then Powder Coated Silver. GPA series fuel pumps. Available in sizes from 109 to 450 liters per hour. Multiple Ohm ranges available to work with factory or aftermarket gauges. EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation. If using on a carbureted application use part#. Size is 32-1/4″ x 20-1/2″ x 9-3/4 (including the mounting flange). Size is 28″ x 20-1/2″ x 9-3/4 (measured without the mounting flange). 20-gallon side-fill fuel tank. 58psi Corvette-style regulator/fuel filter. 255lp/h fuel pump (supports up to 600hp). 25 feet of high-pressure fuel injection hose. (1) 3/8 fuel filter feed line fitting. (1) 5/16 fuel filter/regulator return line fitting. (2) 3/8 female to -6AN male straight filter fittings. (2) 45-degree -6AN female to 3/8 hose fittings. (6) straight -6AN male to 3/8 hose fittings. This complete fuel injection gas tank conversion kit comes with everything you need to modernize your fuel system on your 69-72 Chevy BLAZER ONLY and includes a brand new Galvanized Steel 18 gallon EFI fuel tank, EFI fuel pump kit with installation accessories including a complete fuel line kit and sending unit. The fuel line kit includes. 25-feet of properly rated fuel injection hose and all the correct fittings to plumb your fuel lines from the fuel pump forward along with a 58psi fuel pressure regulator/ filter that is perfect for anybody dropping an LS into their vehicle or who happen to be running an aftermarket fuel injection unit. All the fittings feature a reusable spin-lock connector that does not require specialty tools to disassemble. The sending unit is. Adjustable and will fit 6-24 deep fuel tanks and will work with 6-24V electrical systems as well as negative or positive ground systems too. The FI fuel pump can support up to 600 horsepower and ar. E quiet and reliable and a must for your fuel injected engine. The complete conversion will not only allow you to upgrade your classic truck to EFI, t. Hese tanks will relocate your fuel from out of the cab to under the bed, getting those fumes out of your face so you can enjoy driving your truck again! (Part# TM6372-BZT, FIIK255-90, CPFFK-S). Orders placed Friday and through the weekend will be processed Monday (excluding Holidays). If you receive an item that is damaged or defective or missing components, please notify us within 3 days of receipt.