Bugeye Sprite/Spridget MINI 4 port Fuel injection kit withcross flow billet head
Boost your Spridget or classic MINI Cooper and get rid of all the reliability issues!!! We got rid of the distributor, choke, carbs and many of the reliability issues for this wonderful four port EFI system. We have since converted this particular car to a supercharger set up, so here is a chance to have your own fuel injected Spridget or Mini at a fraction of the replacement cost. The billet head alone is a special upgrade… It’s a custom machined four port fuel injection head and is still like new! Also included is a new fuel tank, new stainless exhaust header… These and all the other pieces are virtually brand new. This kit was used for about 1000 miles and then removed in favor of a new supercharger kit we are developing. This is a complete fuel injection setup with upgraded aluminum cross-flow cylinder head and everything required to convert any 1275cc-powered Sprite or Midget to fuel injection, including, but not limited to. Complete fuel injection intake manifold with four port injectors and fuel rail, pre-mounted to an upgraded aluminum cross-flow cylinder head, billet head with four injector ports-this is not a two port replacement of the carbs but instead a custom head machined for this direct injection with one injector per cylinder! Swirl Pot fuel pump and associated fuel hardware. Exhaust header with custom bung for Oxygen (Lambda) Sensor. Wiring Harnesses and O2, water temp and crank sensors. Control unit and cables for programming. Direct Ignition Coil With Spark Plug Wires. Crankshaft position sensor with reluctor wheel. Nearly new fuel Tank with Added bung for fuel return line Tank is stock- Sprite fuel tank with bung for return line welded in place (Not Pictured). This kit was used in a Bugeye and can be used in any 1275 application. In a classic Mini, the fuel tank and header will not work, but the rest of the kit will work just fine in any 1275. Here is a video of the fuel injection in action in our Bugeye!