Fuel Injection Kit

Clean Injection Pro Series Honda/Acura OBD0, OBD1, and OBD2 Fuel Pump Relay Upgrade Harness Kit! Looking to upgrade your wire to your fuel pump and modify your OEM hanger? Clean Injection Pro Series Fuel Pump Harness will support upgraded fuel pumps such as the popular walbro 255lph, 450lph, 525lph, AEM 320lph or any fuel pump that draws a higher amperage than the factory pump. Clean Injection Pro Series Harness eliminates the possibility of melting the OEM wires or causing potential damage to your main relay. This kit will bypass the regulated OEM fuel pump wires and supply nearly 14.5 volts directly to your fuel pump. This upgrade will also increase fuel flow by up to 15% without doing any other modifications. This kit is perfect for those running a Fuel cell and need a bulkhead wiring harness kit to supply power to the pump. Clean Injection Pro harness is built using Aircraft grade TXL wiring which is resistant to gasoline, oil, grease, acid, and solvents. TXL wiring will also resist elevated temperatures of up to. Powered using 12 AWG wires rated to 20 amps of current draw. We use a Mini Power Distribution Module featuring quick lock latches which keeps the cover securely in place while still allowing for speed opening and closing. The IP67 sealed unit will stand up to road splash, oil, gasoline, and salt spray. The mini Power Distribution module houses a Picker 35 amp 280 micro relay and 30 amp fuse. Very easy to install and completely plug and play. Clean Injection Pro Series harness is powered using the power wire located in the under hood fuse box. Simply unscrew the power wire coming from the alternator and attached the Pro Series Harness Power wire with Ring terminal. The mini Power Distribution module can be mounted under the glove box and then route the wire harness back to your fuel pump hanger. The harness trigger connector plugs right into the OBD1 to OBD2 OEM Honda/Acura 2 pin fuel pump harness connector located on top of the factory fuel pump hanger. That 2 pin plug is now used to trigger the Pro Series Relay instead of powering the factory fuel pump. No cutting or modifications needed for OBD1 to OBD2 models. This kit includes expansion harness that allows you to adapt the pro series harness to OBD0 chassis such as the EF models or CRX. The expansion harness can also be used for custom trigger applications were the user provides their on trigger to the pro series harness. Clean Injection Pro Series harness includes bulkhead wire fitting for those that are modifying the stock fuel pump hanger or suppling power to a fuel pump in a custom fuel cell. The bulkhead fitting features o-ring which seals the bulkhead from fuel or fuel vapors. Honda Civic/Acura Integra OBD0, OBD1 and OBD2 2 and 4 door.