Painless Performance 70921 PowerBraid Fuel Injection Harness Kit with Split Loom
Painless Performance 70921 PowerBraid Fuel Injection Harness Kit w/ Split Loom. PowerBraid Fuel Injection Harness Kit. PowerBraid is a flexible, semi-rigid material, with a tough woven texture and appearance to enhance the look and protect the insulation of any electrical wire bundles or cables. The woven construction provides good drainage while maintaining superior abrasion resistance. The split loom design has a minimum overlap of 25% to allow for easy installation and optimum wiring protection. 1 PowerBraid 3 ft. ¾ PowerBraid 12 ft. ½ PowerBraid 50 ft. ¼ PowerBraid 23 ft. 1/8 PowerBraid 2 ft. 3/8 Heat Shrink 1 ft. ¼ Heat Shrink 1 ft. ½ Heat Shrink 100 – 4in. Tie Wraps 50 – 7in Tie Wraps 1 roll – Electrical Tape 1 roll – Stretch and Seal Tape. Number of Circuits: 8 Fuses with 2 Ignition & 1 Fuel Pump Relay Harness Length: 4 Feet Between Engine and ECM Fuse Type: Blade Firewall Passthrough: Grommet Color Code Based: 2000 Camaro Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires.