Fuel Injection Kit

Steering. Brakes. Suspension. CPP Fuel Injection Conversion Accessory Kit with Fuel Pump and 240-33-ohm Sending Unit. This fuel injection install kit has everything you need to install an in-tank fuel pump and sending unit in your EFI-ready fuel tank while plumbing the rest of your fuel system at the same time. HyperFuel Hy-Fuel Tight Fit Fuel Pump Features. 67Gp/H / 255Lp/h flow rate. Includes additional -6AN fitting for vent port. Depth adjustable from 6 to 12 inches. Supports up to 600HP. Can be used with EFI-ready tanks or used to retrofit an existing tank with adapter rings. CPP LS Conversion Fuel Filter/ Regulator Kit Features. 25 feet of high-pressure fuel injection hose. (1) 3/8 fuel filter feed line fitting. (1) 5/16 fuel filter/regulator return line fitting. (2) 3/8 female to -6AN male straight filter fittings. (2) 45-degree -6AN female to 3/8 hose fittings. (6) straight -6AN male to 3/8 hose fittings. LS fuel filter/ 58psi Regulator. 255LpH maximum fuel pump flow rate. CPP 240-33-ohm Fuel Tank Sending Unit Features. 240-33 ohm sending unit. 6-24 volt DC operation. Works with negative or positive ground electrical systems. Fully adjustable, will fit 6″ to 24″ deep fuel tanks. Includes (5) special O-ring screws and gasket. Works with aftermarket gauges such as VDO, Stewart Warner, Dakota Digital, AutoMeter, Classic Instruments. The HyperFuelT Hy-Fuel Tight-Fit In-Tank Retrofit Kit is a sleek miniature assembly that allows you to fit a high-volume fuel system into almost any tank. This application is perfect for original or aftermarket fuel tanks as well as fuel cells with limited space. This application can also be used with a Tanks, Inc. With clearance in mind, this system is designed with only a 1-1/8 inch tall top, including the gasket, for maximum clearance under the rear floor pan. It is also depth adjustable for tanks from 6 to 12 inches. With the pump submerged in fuel, it will run quieter and last longer, providing you with all your fuel needs. Additionally, this kit includes a. Fuel line kit with 25-feet of properly rated fuel injection hose and all the correct fittings to plumb your fuel lines from the fuel pump forward along with a 58psi fuel pressure regulator/ filter that is perfect for anybody dropping an LS into their vehicle or who happen to be running an aftermarket fuel injection unit. All the fittings feature a reusable spin-lock connector that does not require specialty tools to disassemble. The sending unit is adjustable and will fit 6-24 deep fuel tanks and will work with 6-24V electrical systems as well as negative or positive ground systems too. Part# FI40015, LSLK-F, VSU-240. Orders placed Friday and through the weekend will be processed Monday (excluding Holidays). If you receive an item that is damaged or defective or missing components, please notify us within 3 days of receipt.