67-68 Camaro FiTech 30003 EFI Fuel Injection Gas Tank FI Conversion Kit 90 ohm
The mounting straps are included. FiTech 30003 Go Street 400 HP EFI HP System. FiTech Go Street EFI Features. Self learning – extreme self-learning for wide range super-fast dial in correction. Suitable for crate engines and mild performance engines. Pre-programmed with Bolt-N-Go technology for out of the box performance with no tuning required. EZ-tach input, reads tach signal from: Coil, HEI, MSD/CDI and many other brand ignitions (no timing control). For non boosted engines – normally aspirated applications only. Wide band Bosch 4.2 O2 sensor. On board fuel pump driver. Hand held tuning module for performance tuning. 1 fan control and A/C input (idle kick up). FiTech flow matched 62-lb injectors. Will handle horsepower ranges from 150-400hp. EFI style internal baffling with extra large 4.8 liter dual tube baffled fuel tray to prevent fuel pump starvation. Perfect for your Pro-Touring, Autocross or Road Racing ride. Fuel pump and sender are recessed in the tank for easy installation with no modification needed to your car. Looks like an OE tank when installed. 39-3/8″ x 20-7/8″ x 7-3/4. Flow rate of up to 255 LPH. Supports up to 600HP. All metal components are yellow zinc-plated. 1/4 NPT supply and return line size. 40-100 PSI operating range. Heavy gauge mounting plate. CPP LS Conversion Fuel Filter/ Regulator Kit Features. 25 feet of high-pressure fuel injection hose. (1) 3/8 fuel filter feed line fitting. (1) 5/16 fuel filter/regulator return line fitting. (2) 3/8 female to -6AN male straight filter fittings. (2) 45-degree -6AN female to 3/8 hose fittings. (6) straight -6AN male to 3/8 hose fittings. LS fuel filter/ 58psi Regulator. 255LpH maximum fuel pump flow rate. CPP 90-ohm Fuel Tank Sending Unit Features. 0-90 ohm sending unit. 6-24 volt DC operation. Works with negative or positive ground electrical systems. Fully adjustable, will fit 6″ to 24″ deep fuel tanks. Includes (5) special O-ring screws and gasket. Works with most aftermarket fuel gauges including VDO, AutoMeter, Classic Instruments, Omega, and Stewart Warner. The Game Changer has arrived from FiTech with its latest addition to the line of Go EFI Throttle Body EFI systems. FiTech recognizes that not everyone needs or has 600 horsepower or a wild camshaft. FiTech has taken your needs into consideration and built an EFI designed just for that purpose. The Go Street EFI is a ready-to-run system that strays away from the programmable features and sticks to the basic functions necessary to get the best performance and economy out of your street and mild performance engine. FiTech once again allows you to ditch that old carburetor and advance into the EFI world at the most affordable price on the planet! This complete fuel injection gas tank conversion kit comes with everything you need to modernize your fuel system on your 1967-68 Camaro or Firebird and includes a brand new 18-gallon EFI fuel tank, EFI fuel pump kit with installation accessories including a complete fuel line kit and sending unit. The fuel line kit includes. 25-feet of properly rated fuel injection hose and all the correct fittings to plumb your fuel lines from the fuel pump forward along with a 58psi fuel pressure regulator/ filter that is perfect for anybody dropping an LS into their vehicle or who happen to be running an aftermarket fuel injection unit. All the fittings feature a reusable spin-lock connector that does not require specialty tools to disassemble. The sending unit is. Adjustable and will fit 6-24 deep fuel tanks and will work with 6-24V electrical systems as well as negative or positive ground systems too. The FI fuel pump can support up to 600 horsepower and ar. E quiet and reliable and a must for your fuel injected engine. Orders placed Friday and through the weekend will be processed Monday (excluding Holidays). The item “67-68 Camaro FiTech 30003 EFI Fuel Injection Gas Tank FI Conversion Kit 90 ohm” is in sale since Monday, December 7, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “classic_performance_cpp” and is located in Placentia, California. This item can be shipped to United States.
- Interchange Part Number: TM32A-T
- California Prop 65 Warning: Cancer and Reproductive Harm
- Placement on Vehicle: Front
- Manufacturer Part Number: CM6768CFIT-K
- Brand: Classic Performance Products CPP
- Fitment Type: Performance/Custom
- Mounting Hardware Included: Yes