S&S Gen2 CP4.2 Disaster Prevention Bypass Kit For 2011-2019 Ford 6.7 Powerstroke
S&S Diesel Motorsport, the creator of the original CP4 bypass kit for the 6.7 Power Stroke, is at it again with a much-improved second generation kit. Since its debut in 2016, the original S&S 6.7L Power Stroke CP4 Bypass Kit has safeguarded thousands of injectors from CP4 debris. In fact, it works so well that it has been copied by multiple opportunists within the aftermarket. Being a company founded by fuel system engineers, S&S Diesel Motorsport has the ability, and responsibility, to offer the best solutions to fuel system problems. While the original bypass kit offers really good protection from a CP4 failure, the last four years have given the S&S engineers plenty of time to discover and eliminate potential problems. The S&S Diesel Motorsport Gen2 6.7L Power Stroke CP4 Bypass Kit features all quick connect lines that will eliminate the need for cutting the factory supply line, which is a debris introduction point, especially if the cut is not thoroughly deburred. It also eliminates the need to use a compression fitting, which is a potential leak point. The OE-style quick connect lines also eliminate any threaded joints that are further leak points and have the potential of generating debris during install. The main task of both kits is to supply the CP4 case and the metering unit/plungers independently with clean, filtered fuel, and to reroute case fuel back to the tank. There are two major improvements in how the Gen2 kit accomplishes it. The Gen2 fuel supply is split off into two separate lines 25 inches from the CP4, which will eliminate the chance of contaminated case fuel back-feeding into the clean fuel supply line. The original bypass kit splits off within an inch of the pump, and is more susceptible to debris back-feeding, if the CP4 failure produces enough debris to clog the fuel return system. The other improvement is what happens to the debris when it exits the pump case. The Gen2 kit features a replaceable 2-micron filter (#6130120) with a clear view bowl that prevents debris from reaching the tank, fuel lines, and supply pump. It can be visually inspected at a glance for debris, which will give notice to a failed pump. Previously, unfortunate victims of a CP4 failure, with the good fortune of having an original bypass kit installed, would still need to drop the tank and deal with all of the debris created by the failed CP4. One would think that major improvements would come at a major price increase. Having a clear understanding of common rail diesel fuel systems, and decades of OE engineering experience, enabled the engineers at S&S to make improvements without increasing production costs. Safeguards fuel injectors, rails, lines, and tank from CP4 debris. All OE-style quick connects. 2-micron return filter tested for flow and efficiency. Clear filter bowl for inspection. Fuel supply split-off 25 inches away from the CP4 pump. Made in the USA. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “S&S Gen2 CP4.2 Disaster Prevention Bypass Kit For 2011-2019 Ford 6.7 Powerstroke” is in sale since Friday, April 30, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Fuel Inject. Controls & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada.
- Country/Region of Manufacture: United States
- Interchange Part Number: F250 F350 F450 F550 CP4 Injection Pump
- California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
- Manufacturer Part Number: 7031190
- Brand: S&S Diesel Motorsport
- Fitment Type: Direct Replacement
- CA Proposition 65 Message: WARNING: Cancer & Reproductive Harm
- Warranty: 1 Year
- Mounting Hardware Included: Yes