Radium Engineering 20-0199-06 Universal Fuel Pulse Damper Inline Kits FPD-R, 6AN
Fuel Pulse Damper, Inline Kits – FPD-R (Fuel Pulse Damper-Range), Inline, 6AN. FPD-R base pressure requirement = 40 – 70psi (static). Anodized aluminum top, R=range. Anodized aluminum body with female -8AN ORB ports. Anodized aluminum ORB adapter fittings, selectable size. Gasoline and alcohol (E85) resistant diaphragm. Stainless steel M6x1mm mounting bolts/nuts. Rubber vacuum hose, 4mm ID. The opening and closing of fuel injectors creates pressure pulses in the fuel rail; this can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD’s internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air/fuel ratio spikes, commonly experienced as “stumbling”, that are difficult to tune out. Most high performance OEM engines use an in-line fuel pulse damper from the factory including the Toyota 2JZ-GTE, Nissan VQ35DE, Subaru EJ20/EJ25, etc. The use of an inline damper is great for applications where there is not an option for direct fuel rail mounting. NOT TO BE USED ON THE LOW PRESSURE SIDE OF MECHANICAL FUEL PUMPS (INCLUDING DIRECT INJECTION ENGINES). What makes Radium FPDs unique? Along with having the flexibility of using common fittings, Radium Engineering FPD’s use a vacuum/boost reference port which allows for proper fuel pulse damper performance even at elevated fuel pressures. This becomes essential for boosted systems that use a 1:1 rising rate fuel pressure regulator. The kit features an anodized aluminum housing with a large 0.69″ center bore that uses two in-line inlet/outlet ports that are machined with 3/4″-16 UNF threads for 8AN ORB fittings. Depending on the size of the fuel feed hose used, there are 3 kits to choose from which include different male adapter fittings (-6AN, -8AN, barb). These fittings seal to the billet housing using FKM O-rings. An 1/8 NPT female port is threaded into the center of the fuel pulse damper. A fuel pressure gauge is commonly used here or other sensors for pressure or temperature data. Using the supplied M6 bolts/nuts, the FPD kit can be mounted at any possible angle including upside down. For best results, the damper should be plumbed as close to the fuel rail(s) as possible. Like any fuel system part, the FPD kit should be kept away from excessive heat areas. This product is safe for use with all fuel types including alcohol blends such as E85. The inline dampers are offered in three different versions and a selection should be made based on the type of hose connection needed. The -01 version is great for 5/16 (8mm) fuel hoses. The -06 version comes with adapter fittings for connecting -6AN hoses. The -08 version comes with adapter fittings for connecting -8AN hoses. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Injection Parts\Additional Fuel Injection Parts”. The seller is “streetrays” and is located in this country: US. This item can be shipped worldwide.
- Performance Part: Yes
- Interchange Part Number: RDM-20-0199-06, 20019906
- Type: Fuel Pulse Damper
- Universal Fitment: Yes
- Brand: Radium
- Manufacturer Part Number: 20-0199-06